BuffPro® Finishing Foam Pad
£ 58.00 excl VAT
Foam Pads for Paint / Gelcoat rejuvination and finishing.
22 in stock
ADDITIONAL INFORMATION
Description
For use with the BuffPro® Electric Polisher.
The Foam Pads are for the BuffPro Model JF180 Axial Polisher, is an open-cell polyester foam pad that works with your mildest finishing compounds to provide unparalleled final finishing results. The wide bite and fine cells mean that the compound stays where the work is being done and that you finish all of your work quickly and uniformly.
This item – Foam Finishing Pad.
For use on fully cured primed or painted metal surfaces, soft body compounds, gel coat maintenance, and final-finish. The pad is an open-cell polyester foam for use on fully cured primed or painted metal surfaces, soft body compounds, gel coat maintenance, and final-finish. Resists saturation with compound and is easily washed out with soap and water.
Other pads – Polishing Pad.
The BuffPro® Polishing Pad is recommended for polishing, glazing or as a one-step wax cleaner. This pad can also be used on stone, fully-cured primed or painted metal, soft body compounds, maintenance on gel coat, finishing work and bringing raw metal to a high-gloss shine. These pads easily wash out with soap and water and resist being saturated with compound.
Other Pads – Power Pad.
The BuffPro® heavy cutting Power Pad for the BuffPro® Model JF180 Polisher, is an open cell polyester foam pad that works with your coarsest compounds to provide unparalleled cutting power. The wide bite and open cells mean that compound stays where the work is being done and that you finish all of your work quickly and uniformly. We recommend the BuffPro® Heavy Cutting Power Pad for use with your heaviest compound to remove swirl marks left by high speed buffers or orbital polishers, scratches, heavy oxidation, paint or 1500 grit wet sanding. The pad can also be used on stone, raw metal, fiberglass, gel coat repairs, pre-finishing prep work and polished concrete. These pads easily wash out with soap and water and resist being saturated with compound.
BuffPro Pad Cleaning
Clean BuffPro Pads by hand using a mild detergent and warm water. Work the detergent into the pad using your fingers. Rinse pad thoroughly with warm water. Squeeze out as much water as possible by hand. Set pad on it’s end at room temperature and leave to dry overnight. Pads should be ready for use the following day. Do not spin dry wool pads using the BuffPro Buffer, doing so may cause damage and void its warranty.
Foam Finishing Pad
Polishing Pad
Power Pad
PRODUCT INFORMATION
- SKU: FA-70109001
- Weight: 0.3 kg
- Dimensions: 18 × 18 × 20 cm
- Part Number : 70109001
- Commodity Number : 8467295900
- Country of Origin : United States of America
Downloads & Guides
Videos
HAVE A QUESTION
ABOUT THIS PRODUCT?
Please fill in the contact form and a member of our team will be in contact with you.
Alternatively, call or email us.
CALL US
020 8597 8781
EMAIL US
[email protected]